[BAT] i/o error

Wed, 28 Nov 2001 10:41:03 -0500

On Tue, Nov 27, 2001 at 01:24:08PM -0800, h1kari wrote:
> On Wednesday 31 December 1969 16:00, you wrote:
> > alright, I changed the line in if_wi.c except the line was more like
> >
> > if(!(ifp->if_flags & IFF_RUNNING) || !sc->sc_prism2)
> > so I just rid it of the !sc->sc_prism2 part
> >
> > that fixed that issue...
> > another issue is that when I put the card into like led test mode for
> > example, the light on my card will go solid, then I get a SIOCSPRISM2DEBUG:
> > Conection timed out and then I can't prism2ctl to do anything, I just get
> > timed out errors like wi0: wi_cmd failed with 60
> >
> > so it seems to be loosing the card, just courious why this would be
> > happening... also do you have any places to point for the firmware you
> > mentioned? the only firmware I found was 8c2, which I don't think is what I
> > want.
> 
> I'm assuming you have 7v6 installed right now... that's the only one I've had 
> problems with (very similar problems to the ones you've been experiencing).. 
> I'd try upgrading to 8c2 and see if it helps. Anyone else on the list that 
> uses dlink cards have any insight?

I have problems with the LED test on my card under FreeBSD.  A simple eject/reinsert fixes it.

> 
> I've also noticed that some cards dont' fully support the ledtest.. For 
> example when I tried it with my smc it wouldn't work at all (probably because 
> it only has one light). Are you having problems with any other of the debug 
> modes?
> 
> -h1kari
> _______________________________________________
> Bat mailing list
> 
> http://lists.dachb0den.com/mailman/listinfo/bat