[BAT] i/o error

Tue, 27 Nov 2001 13:24:08 -0800

On Wednesday 31 December 1969 16:00, you wrote:
> alright, I changed the line in if_wi.c except the line was more like
>
> if(!(ifp->if_flags & IFF_RUNNING) || !sc->sc_prism2)
> so I just rid it of the !sc->sc_prism2 part
>
> that fixed that issue...
> another issue is that when I put the card into like led test mode for
> example, the light on my card will go solid, then I get a SIOCSPRISM2DEBUG:
> Conection timed out and then I can't prism2ctl to do anything, I just get
> timed out errors like wi0: wi_cmd failed with 60
>
> so it seems to be loosing the card, just courious why this would be
> happening... also do you have any places to point for the firmware you
> mentioned? the only firmware I found was 8c2, which I don't think is what I
> want.

I'm assuming you have 7v6 installed right now... that's the only one I've had 
problems with (very similar problems to the ones you've been experiencing).. 
I'd try upgrading to 8c2 and see if it helps. Anyone else on the list that 
uses dlink cards have any insight?

I've also noticed that some cards dont' fully support the ledtest.. For 
example when I tried it with my smc it wouldn't work at all (probably because 
it only has one light). Are you having problems with any other of the debug 
modes?

-h1kari